-
WhatsApp
-
Email
Small vacuum freeze dryer KD-10N can be pre-frozen to -56 °C at no load. The lyophilized area can reach 0.125㎡, which better guarantees the freezing effect.KD-10N is a benchtop freeze dryer with a small volume and good lyophilization effect. It is suitable for household use.
Features
- In line with international environmental protection standards
- 7-inch color touch screen showing dry curves and historical curves;
- U disk can store freeze-dried data;
- It can install software to print curves;
- The vacuum pump is connected to the main unit with an international standard KF quick connector, which is simple and reliable.
Detail
In order to use the freeze dryer perfectly, you may need the following equipment and features
- Eutectic point test function to master the better sublimation temperature of materials.
- Vacuum control to maximize heat transfer.
- Dual-machine cascade refrigeration system with proven technology and low temperature for -80 °C lyophilizer.
- Wide-mouth manifold freeze-dry bottle configuration, easy to pick up materials, can be connected with imported standard freeze-dried bottle valves. The standard configuration is 6 tubes.
- Optional power distribution defrosts function to accelerate defrost speed and shorten drying cycle.
- Circulating water type multi-function vacuum pump
- Diaphragm vacuum pump
- Rotary vane vacuum pump
10N bell-type freeze dryer standard configuration
- Ordinary type: main unit + drying room + Anti-return oil vacuum pump + 7 inch touch screen with USB + nitrogen inflation valve,
- Gland type: main unit + drying room + Anti-return oil vacuum pump + 7 inch touch screen with USB + nitrogen inflation valve
- Ordinary multi-manifold: mainframe + multi-manifold drying room + anti-return oil vacuum pump +7 inch touch screen with USB + nitrogen inflation valve + 8 sets of freeze-dried eggplant type bottle
- Gland multi-manifold: main unit + multi-manifold drying room + anti-return oil vacuum pump +7 inch touch screen with USB + nitrogen gas filling valve + 8 sets of freeze-dried eggplant type bottle
- T-frame: mainframe + T-frame (multi-tube) + anti-return oil vacuum pump +7 inch touch screen with USB + nitrogen inflation valve + 24 ampoule T-frame
After sale
- 1 year warranty service and all life maintenance.
- Technical Egineer are avalible for oversea trainning.
- Free change for some parts
- Remote control technical consult
- Free installation DVD
- Maintenance plan
Package
Transport
| Model | KD-10N | |
| Specification | Ordinary multi-manifold | |
| Freeze-dried area(㎡) | 0.125 | |
| Water catching capacity(kg/ time) | 3 | |
| Vial bottle bottling | Φ12mm | 920 |
| Φ16mm | 480 | |
| Φ22mm | 260 | |
| Number of eggplant bottles | 8 | |
| Ampoule interface | / | |
| Disk loading solution(L) | 1.5 | |
| Material tray size(mm) | Φ200 | |
| Material spacing(mm) | 70 | |
| Material tray size( 个) | 4 | |
| Cold trap size(mm) | Φ250×150 | |
| Cold trap minimum temperature(°C) | ≤-56 ( No load) | |
| -80°C cold trap minimum temperature(°C) | ≤-80 ( No load) | |
| Ultimate vacuum(Pa) | ≤5 ( No load) | |
| PowerKw(220V50Hz) | 0.95 | |
| Ambient temperature(°C) | ≤25 | |
| Overall dimensions(mm) | 590*460*400+440 | |
| -80°C overall size(mm) | 700*450*720+440 | |
| Total Weight(kg) | 57 | |
| Special Note | The size and weight of the whole machine do not include the external vacuum pump. The height of the B/D lyophilizer does not include the manual gland handle (the height is about 70mm) | |
